HWK Update & Discussion Here

Release Date: 21/03/2008

The Official release is ready in our download area http://sarunasoftware.com.


Please follow the instructions careful on the above page.

The Update Client is launched after HWK Support Suite install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


NOTE: Support Access is via the software modules only, download managers have been disabled.


UFS_DCTxBB5 v2.0.7
--------------------

1. New BB5 products:
RM-179,RM-223,RM-233,RM-244,RM-256,RM-264,RM-269,RM-278,RM-279,
RM-313,RM-314,RM-320,RM-321,RM-322,RM-323,RM-397,RM-421,RM-426
(N81-1,N81-3,8800e-1,E51-1,N81-5,7900d-1,N81-6,6500s-5,5610d-5,N82-1,
N82-2,N95-2 8G,N95-6 8G,6301,6301b,6500c-5,N95-4,E51-2)
2. ISM flashing support for BB5 products.
3. Improved DCT4/WD2 Flash Loaders version display.
4. Fixed BB5 PM file open bug.
5. Improved Extended PHONET messages handling.
6. Store of Ext.VPP setting in INI file.
7. Support of new Flash Chips.
8. Fixed CNT flashing for 7370 and 6151.
9. Flash Update pack (7.46.43.30662) added.


Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone. This has always been the case with 7 pin cables, but from this release 7 pin cables are supported by UFS+HWK.


UFS_LG_GSM v2.0.7
-------------------

1. KG280, KP200, KP202, MG280 support added.


UFS_SAMs v2.0.7
-----------------

TRIDENT
C170,C178,C188,E210,E218,E840B,E848,E870,E878,E888 ,E958,
F210,F218,P520(Armani),M608,T519,T629,U600B,U608B added.
OM(SYSOL)
C160,C160B,C160L,C160M,C166,C168,C180,C450,C458,CC 03,
M110,X540,X550 added.
E2P unlock fixed for E420,E428...
Implemented MSL calculation, allows direct unlock
without E2P corruption and shows correct codes.
Rebuild of corrupted Master Key during wrong unlock.
IMEI rebuild for new models (Sysol3)
SWIFT
D880,D888(Duos),E746,G608,L600,L608,M610,M618 added.
Implemented MSL calculation, allows direct unlock, and
show correct codes, without any data lose or setting to
default values of MSL, BTID, IMEI or Radio settings.
E2P Sections Read/Write introduced (compatible with TAT)
IMEI and BTID rebuild.(Imei option for Swift_1 only now)
Fixed bug of 0 length TFS files flashing (affected:
java appletts in D880, E200, E250, G600, M610 products)
COMMON INFO
E2P(hee)sections R/W allows to transfer calibration data,
radio setttings, etc. from product to product, without
damage to other vital data, unlike E2P or FULL clone.
Or allows to Read-Edit-Write well known values.
Warning,
Access to some sections can be denied by firmware, or
can have different values dependand on firmware version.
In case of protected or none existing section will have
result length of 0 or lose of TAT mode.


Many thanks to all those who have supported us!!!

Release Date: 14/05/2008
The Official release is ready in our download area http://sarunasoftware.com.

Since this is a MINOR release there is NO need to update your HWK, there is also NO need to remove HWK Suite v2.0.7

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

UFS_DCTxBB5 v2.0.7.1
----------------------
1. New BB5 products: RM-337,RM-364,RM-365,RM-366,RM-451
(6300i,3120c-x,8800e-5)
2. New DCT4 products: RM-340,RM-341,RM-362,RM-363
(2600c-2,2600c-2b,5000d-2,5000d-2b)
3. Flash Update pack (8.6.1.31560) added.
4. New RAP, UPP ASIC's and FLASH Chip's support.
5. New DCT4+ product unlock (see corresponding list)
6. BB5 ASK file will be created during "Rd Cert"

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.

thankkkkkkkkkkkkkkkkkkkkkkkkkkk

thanks bro................................................

thanks sir

HWK Release 14/09/2008 - Discussion

--------------------------------------------------------------------------------

Release Date: 14/09/2008

The Official release is ready in our download area http://sarunasoftware.com.


Please follow the instructions careful on the above page.

The Update Client is launched after HWK Support Suite install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


UFS_DCTxBB5 v2.0.8.0
----------------------

1. New BB5 products:
RM-207,RM-235,RM-236,RM-257,RM-270,RM-277,RM-325,RM-328,RM-342,
RM-343,RM-345,RM-346,RM-352,RM-354,RM-355,RM-357,RM-358,RM-359,
RM-367,RM-378,RM-379,RM-386,RM-387,RM-396,RM-397,RM-400,RM-407,
RM-408,RM-409,RM-410,RM-411,RM-414,RM-416,RM-417,RM-418,RM-419,
RM-420,RM-422,RM-425,RM-436,RM-462
(6263,N78-1,N78-5,3555b,3555,3555c,6600f-1c6220c-1,N78-3,E66-1,E66-2,
E71-1,3600s,7610s,7610sb,E71-2,5610d-2,5610d-2b,6210s-1,7310cb,7310c,
6210s-5,6220c-5,6212c,6500c-5,6650d-1c,E71-3,6210s-1c,5320d-1,5220b,
5220,6600s-1c,5320,5320d-1b,5320,6210s-1b,E66-3,6124c-1,6122c,7210c,E71-5)
2. New DCT4 products:
RH-116,RH-117,RH-118,RM-391,RM-392,RM-393,RM-394,RM-395
(7070,7070b,1681c,2760h,2680s,2680s-2b,1680c-2,1680c-2b)
3. New DCT4+ UNL versions support:
1200 (RH-99 v5.51,v5.53), 1200b (RH-100 v5.32)
1208 (RH-105 v5.51,v5.53), 1208b (RH-106 v4.00,v4.11,v5.23,v5.32)
1650 (RM-305 v5.32,v5.51,v5.53)
1680c-2,1680c-2b (RM-394,RM-395 v5.61,v5.63)
2610,2610b (RH-86,RH-87 v6.73,v7.10)
2630 (RM-298 v5.61)
2760 (RM-258 v4.20,v5.61), 2760b (RM-259 v4.20,v5.61)
2760h (RM-391 v5.45)
4. Fixed minor bugs.
5. New Flash Update Pack 8.36.2.35145

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


LG_GSM V 2.0.8.0
-----------------

v 2.0.8.0 (HWK Required)
-------
1. Added "FSct0" (Force Sector 0 Overwrite) Checkbox in
Infineon platform.
Use it for Frozen or blinking phones (KE800,..)
2. KP130, KP210, KP215, KP260, KP265 support added.


SAMs V 2.0.8.0
---------------

TRIDENT
S730i (DUNL,IM,FL)added.
B200,B300 DUNL and IM fixed.
Reserved Regions values revised and fixed.
MSL Repair enhanced, and added for following products:
C17x,C26x,C520,E84x,E90x,E95x,F21x,M300,M60x,P520, U10x,U30x,X82x
"Erase NOR" activated.
Enhanced 4CC protocol handler (fixed error on PC busy)
TRIDENT VISION
E21x,J60x fixed (INF,DUNL,IM)
M310 added (FL,CUNL)
Enhanced 4CC protocol handler (fixed error on PC busy)
OM(SYSOL)
A117,C288,M130L added (DUNL,IM,FL,SECT)
E746 bug fixed.
SWIFT
D780,D788(Duos2),D828E,E251,E251C,E258D,F110,G808E ,J210,L310,
P180,P200,P260,P850,P858,T309,T509,U908E,X700N (DUNL,FL,SECT)
F488E,J150 (FL,CUNL) Use 'Unlock E2P' to see Codes.
E35x,E37x,T809 DUNL, SECT and IM fixed.
E480,E488 bug in DUNL,SECT fixed.
D880-Duos flashing bug in 2.0.7.2 fixed.
X700 SECT fixed.
SWIFT-AEROFONE
B130 introduced(FL,CUNL) Use 'Unlock E2P' to see Codes.
QUALCOMM
A411,A412,A701,A706,A707,A711,A717,A727,A736,A737, A801,A817,
F330,F338,F400,F408,F480,F488,F490,F510,F550,F700, G400,G800,
G800B,G800L,G808,J200,J200L,J208,J630,J638,L170,L7 60,L760G,
L768,L810,L811,P910,P920,P940,P950,P960,T639,T819, U700,U700B,
U708,U800,U800F,U900,U900U,U908,V705,V706,V707,V70 8,Z150,Z170,
Z230,Z238,Z240,Z240E,Z248,Z310,Z360,Z368,Z400,Z540 ,Z548,Z560,
Z570,Z720,Z728,Z740,ZV40,ZV50,ZV60 introduced (FL,INF,REUL)
COMMON
Product Langpacks description added (Info and MCU-Open)
Note, real menu languages can differ from listed here,
for different models, firmware versions. Languages in
brackets is not mandatory for current Region.


SeDBx v2.0.8.0
---------------

DB2010
1. Added Support for: 36Brown, 49Brown
DB2012
1. Added Support for: 50Brown, 51Brown, 51Red, 53Red.
2. Added CID Upgrade.
DB2020
1. Added Support for: 49Brown.
2. Loaders Updated.
PNX5230
1. Added Support for: 49Brown, 52Brown.
2. Loaders Updated.

USB Drivers are installed to X:\Program Files\SarasSoft\UFS\UFS_DBX\USBFlashDriver

SeDBx Quick Guide has been updated.


Many thanks to all those who have supported us!!!

http://www.sarasbox.co.uk/
http://www.gsm-solutions.co.uk/

http://rapidshare.com/files/145342020/HWK_Support_Suite_Setup_v02.08.000.exe



http://rapidshare.com/files/145582767/HWK_Setup_Suite_v02.08.000.exe

UFS3 Blue Detect USB<->Cable serial how to repair this?tx

hi man pls give me the registration of hwk 2.080.....plzzzzzzzzzzzzzzzzz
e-mail : bunchhew@yahoo.com

HWK updates Release v2.0.8.2 Date: 10/02/2009

Release Date: 10/02/2009

The Official release is ready in our download area http://sarunasoftware.com.


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


UFS_DCTxBB5 v2.0.8.2
----------------------

1. Flash Update Pack problems Fixed.
2. New BB5 products:
RM-247,RM-297,RM-333,RM-334,RM-335,RM-348,RM-349,RM-350,RM-356,
RM-398,RM-399,RM-415,RM-427,RM-428,RM-429,RM-437,RM-449,RM-450,
RM-472,RM-493,RM-494
(N96-1,N96-5,N85-1,N85-3,N85-5,N79-1,N79-3,N79-5,5800d-1,7510a,7510a-b,
6600s,5800,5800,3610a,E63-1,E63-2,E63-3,N96-3,E71-5,E66-5)
3. DC4 Flash Chip 0020883C Fixed.
4. New DCT4 products:
RH-111,RH-112,RH-113,RM-438,RM-439,RM-490,RM-500
(1202-2,1202-2b,7100s-2,7100s-2b,1680c-2b,2680s-2b)
5. New DCT4+ UNL versions support:
1200(RH-99 v5.71,v5.80) 1202(RH-112 v2.80) 1208(RH-105 v5.71,v5.80)
1650(RM-305 v5.71,v5.80)
6. User interface localisation.


Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


LG_GSM V 2.0.8.2
-----------------

1. Infineon GB100,GB105,GB106,KG285,KG288,KP100,KP105,KP106,KP 107
support added. (BIN bundle files open as FLS)
2. Read/Write for Infineon EGOLD Voice added.
3. Auto Backup for Infineon EGOLD Voice added.
4. ADI KF240, KF300
support added. (BIN bundle files open as Code)
Cable as for KP130,KP210,KP260
5. QualComm models introduced.


SAMs V 2.0.8.2
---------------

TRIDENT
B270 added (DUNL,IM,FL)
TRIDENT VISION
J610 MSL corrected (DUNL,IM)
E215L,M320L added (CUNL,FL)
(Use [Reset MMI] if phone ask for password)
OM(SYSOL)
M140 added (DUNL,IM,FL,SECT)
SWIFT
J706,L708E added (DUNL,IM,FL,SECT)
SWIFT-AEROFONE
B130,B130S,B130T fixed flashing for HW 0.600
QUALCOMM
ENUMERATION NOT EXIST: 20 bug fixed (up to COM256 supported)
Fixed flashing for OEMSBL V5.32 and higher (M7500,M8800)
UNLOCK and UNFREEZE added for these models:
F480F,M7500(Armani),M8800(Pixon),U700,U700B,U708,U 800,U800F
(Use [QCDI Info] button to readout keys)
S7220,S7350 added.

Samsung / Qualcomm USB Drivers can be downloaded here:-

http://rapidshare.com/files/190638170/Samsung_USB_Drivers.zip

http://depositfiles.com/files/bmvu711we



We would like for some users to add localisation in their own native language to the software, localisation is added to SAMs only at the moment but will be added to other modules in future.

Conditions:-

1. Only 1 contributer per language.
2. You must know how to use the software and what each function does.
3. The chosen language is your native language or you are fluent in the selected language, for example Chinese is not my native language and I would like someone to take over from me and finish/correct as required.


Many thanks to all those who have supported us!!!


LINKS:

http://rapidshare.com/files/196253848/HWK_Suite_Minor_v02.08.002.exeA

http://depositfiles.com/files/qlw27w0o3


http://www.megaupload.com/?d=ECOH7QI2

http://ifolder.ru/10479588

http://upload.com.ua/get/900698181/

pleace helpme update hwk eror

The Official release is ready in our download area http://sarunasoftware.com.


[color:c957="Magenta"]WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


UFS_DCTxBB5 v2.0.8.4
[color:c957="Blue"]----------------------

[color:c957="Blue"]1. Added info about flashed Certificates for BB5.
2. Corrected DCT4+ unlock error messages.
3. Find Product settings by VPL files.
4. New BB5 product RM-458 (6208c)


Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


[color:c957="Black"]SAMs V 2.0.8.4
[color:c957="Magenta"]---------------

[color:c957="SlateGray"]TRIDENT
B100M added (DUNL,IM,FL)
TRIDENT VISION
B310R added (CUNL,FL)
SWIFT-AEROFONE
E1070,E1100T,E1125 added (DUNL,IM,FL)
QUALCOMM
Increased Comms speed on RJ45 interface.
UNLOCK and UNFREEZE added for these models:
L810,L811
(Use [QCDI Info] button to readout keys)


We would like for some users to add localisation in their own native language to the software, localisation is added to SAMs only at the moment but will be added to other modules in future.

Conditions:-

1. Only 1 contributer per language.
2. You must know how to use the software and what each function does.
3. The chosen language is your native language or you are fluent in the selected language, for example Chinese is not my native language and I would like someone to take over from me and finish/correct as required.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk
www.gsm-solutions.co.uk


Official SarasSoft Rapidshare Mirrors:-

http://rapidshare.com/files/218083973/HWK_Suite_Minor_v02.08.004.exe

Thanks to hwk team

Video HWK Installation Here :
http://www.4shared.com/file/95178775/9a21e56e/Install_UFS_HWK_Micro.html

30 jan 2010 hwk ini
Hello,
attached is the latest ini for hwk users. Langauge description for the following addaed:

Rm-629 nokia 5320-1d
rm-594 nokia 5230-1b
rm-591 nokia 2220s-2b
rm-579 nokia 2730c-1b
rm-625 nokia 5232/5233
rh-125 nokia 1616/1616-2
rh-126 nokia 1616-2b
rh-111 nokia 1202-2b
rh-121 nokia 1661-2b
rm-525 nokia 5030c-2b


http://rapidshare.com/files/343660230/DctxBB5.rar

thankssss...................